Internal Scsi Ribbon Cable To Internal Scsi Device; Connecting A Second Internal Scsi Device - Adaptec AHA-3940 User Manual

AHA-3940/3940W User's Guide
2
Plug the last connector on the ribbon cable into the SCSI con-
nector on the internal SCSI device, as shown in Figure 2-6.
Internal SCSI
Device
Figure 2-6. Internal SCSI Ribbon Cable to Internal SCSI Device
3
To connect a second internal SCSI device, plug the middle
connector of the SCSI ribbon cable into the SCSI connector on
the second internal SCSI device, as shown in Figure 2-7.
2nd Internal SCSI
Device
Figure 2-7. Connecting a Second Internal SCSI Device
4
To connect three or more internal SCSI devices to a SCSI bus,
plug the remaining middle SCSI connectors into the other
internal devices.
2-10
A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A A
AHA-3940/3940W User's Guide
A
A A
Stock Number: 510600-00, Rev. A
A A
A A Print Spec Number: 492707-00
A A
Current Date: 8/24/94
A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA
Pin 1
Pin 1
To 1st Internal
SCSI Device
ECN Date: 08/30/94
AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
Colored Stripe
Colored Stripe
To Host
Adapter
A
A A
A A
Page: 2-10 A A
A
A A
A A
AAAA AAAA AAAA A A A A