Post Problems Flowchart - HP ProLiant ML110 G7 User Manual

POST problems flowchart

Symptoms:
•
Server does not complete POST
NOTE:
•
Server completes POST with errors
Possible problems:
•
Improperly seated or faulty internal component
•
Faulty KVM device
•
Faulty video device
Item See
"Video problems" in the HP ProLiant Servers Troubleshooting Guide
1
located on the Documentation CD or see "Troubleshooting resources (on
page 76)"
KVM or iLO documentation
2
"POST error messages and beep codes (on page 92)"
3
"Symptom information (on page 78)"
4
"Port 85 and iLO messages" in the HP ProLiant Servers Troubleshooting
5
Guide located on the Documentation CD or see "Troubleshooting resources
(on page 76)"
"Server health LEDs (on page 81)" and "Component identification (on
6
page 7)"
"Loose connections (on page 80)"
7
"General memory problems are occurring" in the HP ProLiant Servers
8
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page 76)"
Server maintenance and service guide, located on the Documentation CD
9
or the HP website (http://www.hp.com/products/servers/platforms).
"Breaking the server down to the minimum hardware configuration (on
10
page 79)" or in the HP ProLiant Servers Troubleshooting Guide located on
the Documentation CD or see "Troubleshooting resources (on page 76)"
11 •
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page 76)"
•
Server maintenance and service guide, located on the Documentation
CD or the HP website
(http://www.hp.com/products/servers/platforms)
"HP contact information (on page 99)"
12
The server has completed POST when the system attempts to access the boot device.
Troubleshooting 87