Post Problems Flowchart - HP ProLiant DL585 User Manual

POST problems flowchart

Symptoms:
•
Server does not complete POST
NOTE:
•
Server completes POST with errors
Possible problems:
•
Improperly seated or faulty internal component
•
Faulty KVM device
•
Faulty video device
Item Refer to
1 "POST error messages and beep codes (on page 80)"
2 "Video problems" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation C
(http://www.hp.com/support
3 KVM or iLO 2 documentation
4 "Loose connections (on page 68)"
5 "Symptom information (on page 67)"
6 Server maintenance and service guide, located on the Documentation
CD or the HP website (http://www.hp.com/products/servers/platforms)
7 "Port 85 and iLO messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support)
8 "General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (http://www.hp.com/support)
9 •
•
10 •
•
The server has completed POST when the system attempts to access the boot device.
)
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support)
Server maintenance an d service guide, located on the Documentation
CD or the HP website
(http://www.hp.com/products/servers/platforms)
"Server information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Docu
HP website (http://www.hp.com/support)
"Operating system information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Docu
HP website (http://www.hp.com/support)
D or on the HP website
mentation CD or on the
mentation CD or on the
Troubleshooting 75