Power Source; Installation; Placing On The Table; Mounting The Speaker Bar Onto A Wall - Craig CHT921 Owner's Manual

Insert the small plug from supplied AC/DC adaptor to DC IN jack
on the rear of the unit and insert the AC/DC adaptor
to the wall outlet having AC 100-240V~, 50/60 Hz.
NOTE:This AC/DC Adapter is intended to be
correctly orientated in a vertical or floor mount position.

1. Placing on the table

When placing the Sound Bar on an entertainment center, bookshelf, or any type of
enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar
for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat
generated from the Sound Bar could produce a potential heat hazard.

2. Mounting the Speaker Bar onto a wall

We recommend having this speaker professionally mounted. By using the included
wall mounting accessories, the sound bar can be mounted onto a wall.
Distance Between Two Brackets
AC/DC adapter
To the DC IN jack on the rear of unit.
16.4 inches
3