General Operations; Listen To Fm Radio; Bluetooth Pairing And Playback - Craig CHT921 Owner's Manual

GENERAL OPERATIONS

1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure.
Indicator will light.
2. Press the Power/SOURCE button on the unit or the
to power on the unit from standby mode.
3. Press the Power / SOURCE button on the unit or the SOURCE button on remote control
repeatedly to switch to desired mode.The color of Indicator will turn to corresponding color as below:
~ Blue: BT ( Blue Tooth )
~ Purple: Radio
~ Green: AUX 1
~ Orange: AUX 2
4. During Playback:
~ Press the VOL ( Volume ) +/- buttons to adjust volume level as desired.
~ Press the EQ button repeatedly to select and set equalizer mode as desired.
~ Press ( Mute ) button on the remote control to turn off the sound. Press again to resume.
~ Press the BASS +/- buttons to adjust the sound level of bass.
~ Press the TREBLE +/- buttons to adjust the sound level of treble.
5. When finished listening, press and hold the
the Power button
Indicator will turn Red.
6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.

LISTEN TO FM RADIO

1. Power ON the unit as previous procedures.
2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Purple.
3. Press the FM SCAN button on the unit to auto search and plays the next availble FM station.
Repeat the same procedures until the desired radio station is searched and play. Or
4. Press and hold the
starts blinking. The unit will start to search next ( or previous ) available FM radio station then plays.
Repeat the same procedures until the desired radio station was received and plays.
5. For fine tune, press and release the
Note: When a FM stereo station was searched, the unit will plays it in stereo mode automatically.
FM Antenna
The Antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
BLUETOOTH PARING AND PLAYBACK
BT ( Blue Tooth )
In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows: In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows: In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:
1. Power ON the unit as previous procedures.
2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Blue and blink.
3. Power on the external BT Device and enter to searching mode.Start
instructions on the external BT Player. After paired, the Indicator will stop blinking.
( For details pairing procedures, please refer
~
Notes:
When the external BT Device searched the unit, our model number
"CHT921" will appear on the display of the external BT Device.
~
Pairing code "0000" may need to enter.
Normal operation after paired:
1. Turn on the BT function of the external BT Device.
2. Power ON the unit as previous procedures.
3. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Blue.
4. Wait a few seconds until the unit paired to the external BT Device automatically.
5. Play the music in the connected BT Device as usual.
6. During playback:
--Press the button to pause; press again to resume normal playback.
--Press the / TUNE - or
on the remote control to power off ( Stanby mode )
/TUNE - or / TUNE + buttons on the remote control until the indicator
/TUNE - or
/TUNE + buttons to skip tracks.
8
Power button on the remote control
Power /SOURCE button on the unit or press
/TUNE + buttons repeatedly.
to the user's manual of your BT Device. )
The Red
the unit. The color of
pairing as the on screen