Download Print this page

Power Source - Craig CHT823DG Owner's Manual

Tower with color changing lights and bluetooth wireless technology

Advertisement

POWER SOURCE:

The unit has a built-in Li-ion rechargeable battery, recharge it before first time use or when it is
drained as follows:
Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port
on the top of the unit.
Connect the full sized USB Plug from the supplied USB Connection Cable to any
Computer or USB Charger (Computer and USB Charger not included) to start charging as the
the illustrated below:
To
To Personal Computer or
USB Charger (Not included)
3. During charging, the Red Charging Indicator on the top of unit will illuminate. When finished, it
will turn off.
Notes:
During charging, you can also play and listen music at the same time.
Your battery will last longer if you're following these simple guidelines for caring and storing
A. Before first time use, charge it approximately 4 hours until the unit is fully charged.
B. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
Do not charge longer than 24 hours. Excessive charging or running the unit until battery fully
drains will damage battery. Battery life will be extended if you keep the battery fully charged.
D. Battery life naturally shortens slowly over time.
The rechargeable battery incorporated in this product is not user replaceable.
BT (Bluetooth) pairing:
First time use or re-pairing the unit to a new BT Device, pair as follows:
1. Press the
Button on the top of unit to turn on the unit. The Blue indicator on the top of unit will
illuminate and blink.
2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on
screen instructions from the external BT Device. After paired, the unit will sound a prompt tone
and the Blue Indicator will stop blinking.
3. If pairing is complete you may now play music with your external BT Device.
2

Advertisement

loading