2.1 Mounting on the wooden wall
You may use
2 pieces screws
(Included)
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill the supplied screws directly into the marks that you have made on the wall
and leave approx. 0.3 inch length to hook the sound bar.
3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
2.2 Mounting on the wall
2.2 Mounting on the wooden wall:
You may use
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not supplied ).
3. Insert the supplied plastic inserts into the holes by hammer
4. Secure the supplied screws into the plastic insert and leave approx. 0.3 inch
length to hook the sound bar.
5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
2 pieces screws
(Included)
(1)
2 pieces plastic inserts
(Included)
4
( Not Supplied )
.
(2)