First Time Use Of The Remote Control; Replacing Batteries For Remote Control; Battery Precautions; Effective Distance Of Remote Transmitter - Craig CHT921 Owner's Manual

-First Time Use
Remove and discard the insulation tab as figure on the right.

-Replacing Batteries For Remote Control

1. Push and slide out the battery holder as figure 1 below.
2. Replace the battery with a new CR2025 button cell as the polarity
markings on the rear of the Remote Control.
3. Close the battery holder.
Fig.1 Fig.2
Fig.3

BATTERY PRECAUTIONS

Remote Sensor
°
°
30
30
7