Using Your Flip & Grill - Sunbeam Flip & Grill HG3200 Instruction/Recipe Booklet

Using your Flip & Grill
Before using your Flip & Grill
Before using your Flip & Grill
time, remove all packaging and promotional
materials from the cooking plate, drip tray,
base and control probe.
With the control probe detached, wash
the cooking plate, drip tray and base with
warm soapy water using a mild household
detergent.
Rinse and dry thoroughly. Make sure the
interior of the probe inlet is fully dry.
Condition the cooking plates to protect the
non-stick surface by applying a light coating
of vegetable oil or use a non-stick cooking
spray. Wipe off excess oil.
For easy cleaning line the drip tray with
aluminium foil to collect the fats and juices.
Place drip tray into base.
Ensure the drip tray and grill plate are
correctly positioned over the base to
deactivate the safety locking mechanism.
Note: When using the Flip & Grill
first time you may notice a fine smoke haze
being emitted from the unit. This is normal.
It is due to the initial heating of internal
components.
™
for the first
™
for the
™
™
Using your Flip & Grill
1. Place on a flat, level, heat-resistant
surface.
2. Insert the control probe fully into the
probe inlet of the grill plate.
3. Plug the cord into a 230-240 volt AC
power outlet and turn the power ON.
4. Set the control probe dial to the desired
heat setting.
5. Preheat until the thermostat light switches
off, indicating the Flip & Grill
use.
Note: The thermostat light on the control
probe indicates the Flip & Grill
This light will remain on until the set
temperature has been reached and then will
cycle on and off during cooking to ensure
the selected temperature is maintained. The
preheat time will depend on the heat setting
selected.
Note: When grilling on high heat settings, the
Flip & Grill will generate smoke. Selecting
™
a lower heat setting will reduce smoke.
For indoor use, adequate ventilation or an
exhaust fan is recommended.
6. After you have completed grilling turn the
power OFF and unplug from the power
outlet.
Note: Ensure the cord is kept well away from
the cooking plates when in use.
Caution: Do not touch the grill plate when in
use. Avoid touching hot surfaces. Take care
when removing food from the grill. Do not
transport the grill when it is hot.
™
is ready to
™
is heating.
™
5