Install The Pci Riser Cage - HP ProLiant DL360e Gen8 User Manual

Lift the PCI riser cage to unseat the riser boards.
7.

Install the PCI riser cage

CAUTION:
disconnect all power cords before removing or installing the PCI riser cage.
Align the PCI riser boards with the corresponding connectors on the system board, and then press down
1.
the PCI riser cage.
Push down the release tabs, and then rotate them 180° clockwise.
2.
Install the access panel (on page 20).
3.
Install the server into the rack
4.
Power up the server (on page 17).
5.
To prevent damage to the server or expansion boards, power down the server, and
("Installing the server into the rack" on page 27).
Operations 21