4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the oil level dipstick
(p.80) with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
4.4 US qt (4.2 L)
With oil filter change:
4.6 US qt (4.4 L)
5. Install the oil filler cap and tighten
it securely (p.81).
6. Install and lock the engine cover.
SERVICING YOUR OUTBOARD MOTOR
Oil Filter Change
1. Drain the engine oil, and reinstall
the drain bolt (see Engine Oil
Change on p.82).
2. Tilt the outboard motor, and place a
suitable container below the oil
drain guide to catch the used oil.
3. Use a suitable tool to remove the
oil filter, and thoroughly drain the
filter into the used oil container.
64 mm FILTER WRENCH
OIL FILTER
OIL DRAIN GUIDE
RUBBER SEAL
83