Changing A Master, Manager, Or Operator Code; Adding An Rf Key To An Existing User; Deleting A Master, Manager, Or Operator Code; Exiting The User Edit Mode - Honeywell ADEMCO VISTA-40 Installation And Setup Manual

VISTA-40 Installation and Setup Guide

Changing a Master, Manager, or Operator Code

Enter Installer Code * + [8] + new user no. (02-69) + new user's code
* Or Master or Manager Code, but the code must be a higher level of authority than the code being changed (e.g. a
Manager Code can add an Operator-level Code, but cannot add a Master or another Manager Code).
PROMPT
User Number = 03
NEW USER?

Adding an RF Key to an Existing User

To add an RF key to an existing user, or to change a user's global arm option, first delete that user's code, then re-add
the user code as described in the "Adding a Master, Manager, or Operator Code" paragraph.

Deleting a Master, Manager, or Operator Code

Enter your code * + [8] + new user no. (02-69) + your code again
* Or Master or Manager Code, but the code must be a higher level of authority than the code being changed (e.g. a
Manager Code can add an Operator-level Code, but cannot add a Master or another Manager Code).
PROMPT
OK TO DELETE 03?
0=NO 1=YES
A user code can be deleted only from the partition through which it was entered. If an attempt is made to
delete from another partition, the message "User [XX] Not Deleted" is displayed.

Exiting the User Edit Mode

Press either [7] or [#], or don't press any key for 10 seconds.
8-4
EXPLANATION
The system detects that the user number is already assigned, and prompts if this is a new user.
Press 0 (NO).
The system then confirms that the change is allowed based on authorization level.
EXPLANATION
The system prompts to confirm that you want to delete this user. Press 0 (NO) or 1 (YES).
If you answer "yes," that user's code is removed from all partitions to which it was assigned, and all
authorization levels and other information about that user are deleted. Note: A user can be deleted only by
a user with a higher authority level. A user cannot delete himself.