Step 6: Setup Complete - TRENDnet TV-IP662WI User Manual

TRENDnet User's Guide
After selecting the Synchronize with Network Time Protocol server option, the
following will appear.
Select and enter the NTP Server address used here or alternatively select the Set NTP
Server from DHCP option to allow the camera to obtain the date and time settings from
the NTP Server that is configured to run in collaboration with the DHCP server on your
local network.
Select the Setup Date and Time Manually option to manual configure the date and time
settings for this camera.
© Copyright 2014 TRENDnet. All Rights Reserved.

Step 6: Setup Complete

This is the final screen of the wizard. It shows the configuration options selected. Click
Apply to make the changes. After clicking the Apply button, a notice will appear to
mention that the camera will restart in 60 seconds and that it is saving the settings to
the camera. After the restart, the Web UI will direct back to the start of the wizard.
TV-IP662WI
30