TRENDnet User's Guide
Setup Your Camera with CD
1. Insert the Installation CD‐ROM into your computer's CD‐ROM drive to
initiate the Auto‐Run program. Choose your preferred language and then
click the Install Camera.
2. Write down the MAC Address of the camera.
© Copyright 2016 TRENDnet. All Rights Reserved.
3. Connect a PoE capable network cable to the camera's network port and
4. Wait while the utility is searches for the camera.
then to a PoE switch and wait for the camera to boot up, click Next.
* A power adapter (sold separately) can be used instead of PoE switch.
TV‐IP420P
9