Step 5: Time Settings; Step 6: Setup Complete - TRENDnet TV-IP862IC User Manual

TRENDnet User's Guide

Step 5: Time Settings

From the drop-down menu, select a Time Zone. Click the checkbox to enable daylight
saving. To edit further options, either select Auto Daylight Saving or Set DST manually.
Auto Daylight will set the Daylight Savings time for you automatically. If you select DST
manually, you can offset the time within 1-2 hours. Then select a start time and an end
time from the drop-down menus provided. You can also click the "Keep current date
and time" which maintains the current time and date of the camera. Other options
include, "Synchronize with Network Time Protocol server". Ask your administrator if you
have a server like this. The last option, "Setup a Date and Time manually", allows you to
manually configure the date and time from the drop-down menus provided.
Alternatively, you can also click "Sync with Computer Time". This uses the current time
settings on the computer you are using to sync with the camera's. Click Next to continue.
© Copyright 2013 TRENDnet. All Rights Reserved.

Step 6: Setup Complete

This is the final screen of the wizard. It shows the configuration options you selected.
Click Apply to make the changes. After you click through, a notice will appear to mention
that the camera will restart in 60 seconds and that its saving. After it restarts, you are
directed back to the start of the wizard.
TV-IP862IC
35