Table of Contents
Advertisement
st
to the 1
base station (i.e. the handset with ID 11), followed by below
processes：
1. Press
MENU
the registration mode.
2. Press & hold the base station
seconds, the base station will emit the prompt sound
(also the base In Use LED is flashing).
3. Press digit
3
Setting.
4. Select BS # 1
5. Repeat above step 1 ~ 4 to continuously add the 2
3
rd
or 4
th
base station.
Re：The base ID for 1
base station is "20", for 3
4
th
base station is "40".
Notes:
1.
When initial setting the "Multi-Base", you have to select the
BS #1 first, then followed the above steps to select 2
th
4
base.
2.
For synchronization mechanism, all handsets must be
register again before start using multi-base scenario. i.e. the
initial handset ID with 1x must register to BS1, and the rest
handsets must be registered to 2
respectively.
3.
After all above processes, the "Multi-Base" is complete then.
(Right) soft key followed by
of handset to enter the Multi-Base
st
base station is "10", for 2
7
to enter
REG
button for thress
rd
base station is "30", for
nd
rd
, 3
~49~
Registration
3.Multi-Base
SELECT
Set Base
BS #1
SELECT
nd
,
nd
nd
th
or 4
base station
BACK
BACK
rd
, 3
or
Advertisement
Table of Contents
