EnGenius EP902 User Manual page 43

entered. When completed, press
key to save.
Re: Up to 16 characters can be entered as the
name.
c. You will then be prompted to enter a number for the
name just entered.
Re: Up to 26 digits can be entered as the number.
d. After entering the number, press the
soft key to save this entry into phonebook.
e. Enter a phonebook entry without a name, the all
records without name will be placed on top of the
phonebook list.
f. To enter the name, press the corresponding
keypad number one or more times according to the
order of the character on the key.
See table below for a list of available characters
and their orders. For example, press
the character "A", twice for "B", etc.
Notes:
1. When enter a phone number, the cursor automatically advances to the
next digit field. Use
backward or forward to insert or delete (the digit above the cursor, or
left of the cursor if cursor is on the right of the last digit).
2. When entering a name, the cursor automatically advances to the next
character field if you press a different key for the next character. If you
need to enter consecutive characters from the same key, you can wait
for the cursor to advance or use
the cursor backward or forward manually. Also use
move the cursor to insert (to the left of the cursor) or delete (the
character above the cursor, or left of the cursor if cursor is on the right
of the last character).
3. By default, all letters are entered in the upper case. Use the
toggle between upper and lower cases.
4. A "Pause" entry represents a 1 second delay in dialing the following
digits, which is useful when calling a sequence of segmented numbers
(e.g., access code, credit card number, auto-attendant entries, etc.)
Pause is entered by pressing the ＃ key twice (LCD displays P).
Entering pause twice (PP) will result in 2 seconds pause in the dialing.
SAVE
SAVE
2
or scrolling key to move the cursor
or
~43~
(Left) soft
Name?
_
Caps = *
SAVE
Number?
_
(Left)
SAVE
once for
scrolling key to move
DELETE
DELETE
or to
key to
＊