Table of Contents
Advertisement
26. Change PIN
Allow changing the base PIN which requires entering the "Base Settings"
(MENU-6-5).
a. Using registered handset to change PIN from MENU-6-5.
b. Default PIN is "0000".
c.
When entering the Base Settings, PIN is required. Default is "0000".
27. Auto Hang Up feature
a. Using registered handset from
hand up feature.
b. If turning on the feature, the handset will automatically hang up the
call when the far-end hangs up the call.
c.
When entering the Base Settings, PIN is required. Default is "0000".
28. Area Code
The area code function allows calls within local and country area codes
to be dialed without the prefix.
a. Enter
MENU-4-6-1
b. Enter
MENU-4-6-2
Re: Up to 3 digits can be entered.
29. Multiple Base setting
Up to 4 base stations can be set in one system.
Re: For best performance, maintain a distance of at least 5 meters
(about 15 feet) between any two base stations.
30. Set Time
The set time function allows user to set date/time to support the DTMF
caller ID (DTMF caller ID doesn't attach date/time when receiving from
PSTN, using this setting, user is able to review the date/time when the
caller ID received).
a. Enter
MENU-6
b. Press
when Multi-Base is set.
c.
Enter Base PIN (Default is "0000").
d. Enter
7
e. Enter 6 digits for YY/MM/DD(Year/Month/Day), then enter 4 digits for
hr:mm (Hour：Minute)
f.
Press
SAVE
31. Mic Gain
to set the "Local" area code.
to set the "Country" area code.
to set Base Settings.
or
scrolling key to select desired base station
to enter Set Time.
(Left) soft key to finish the setting.
MENU-6-6
to turn on/off the Auto
~20~
Advertisement
Table of Contents
