Table of Contents
Advertisement
b-2. Manual: A handset will be set prompted a select from a list of
available lines before making an outgoing call.
b-3. Predefine line: A handset will be set a specific line for making an
outgoing call.
b-4 Off: Disable the capability to make an outgoing call.
c.
Call Barring
c-1. Block the users from dialing long distance calls or international
calls
c-2. Up to 5 digits of each call barring setting; up to 5 entries allowed
Re：If enter "*****", the outgoing call will be restricted.
d. This changing requires to entering the "Call Settings" (MENU-4-3).
[Note] You need to key in the accurate user ID and password to perform
this feature. The default password is "0000".
9. Any Key Talk (except
a
When enable Any Key Talk, press any key(except
soft key) to answer the call.
b. When enable Any Key Talk, while you have two incoming line calls
simultaneously, you can press
to answer the line 2 call.
10. Keyguard
a. When the keyguard is selected, all keys will be locked.
Press
UNLOCK
b. The keyguard will be automatically enabled once returning back to
idle mode for 15 seconds.
11. Dialing Prefix
Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
Places call on hold
13. Mute
and
SILENT
1
(Left) soft key followed by
~17~
soft Key)
to answer the line 1 call or press
to release it.
＊
and
SILENT
2
Advertisement
Table of Contents
