Table of Contents
Advertisement
19. Group Setting
Allow handset to subscribe to one or several groups.
Re: Up to 9 groups (ID: 91~99) can be subscribed.
20. Custom Name
Allow changing the "EP902" screen to the desired wording or info, such
as the user's name.
Re: Up to 32 characters can be entered.
21. Change Pwd
Allow changing the handset password which requires entering in Call
Barring (MENU-4-3) and Menu Display (MENU-8) .
`
Re:Default is "0000".
22. DTMF Duration
a. From
MENU-6-1
b. Default is 100ms.
c.
When entering the Base Settings, PIN is required. Default is "0000".
Re: Better to check with your phone company first before changing it.
23. Programmable Flash key timing
a. From
MENU-6-2
b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms.
c. The default value (600 ms) works in most areas. Changing this
setting may cause Flash key not working. Change only when you
are certain of the new value would work.
d. When entering the Base Settings, PIN is required. Default is "0000".
24. Assign next handset ID for new handset
a. Using registered handset from
ID to a new handset.
b. If not assign next handset ID, the system will automatically assign a
handset ID to a new handset..
c. When entering the Base Settings, PIN is required. Default is "0000".
25. Clear Handset
a. Using registered handset from
registered handset, in case the other registered handset is defected.
b. Once clear the other registered handset, the user is able to register a
new handset for instead.
c.
When entering the Base Settings, PIN is required. Default is "0000".
to select variable duration of DTMF tone.
to select flash key timing
MENU-6-3
MENU-6-4
~19~
to assign a next handset
to remove the other
Advertisement
Table of Contents
