Description For Y-Axis Grinding Travel Data Display - Acer Supra 818PD Operation Manual

MAIN MONITORING DISPLAY / UNIT 5
NO.
01
4-2 DESCRIPTION FOR Y-AXIS GRINDING TRAVEL DATA
DISPLAY (Enter from
NO.
1
2
3
4
DISPLAY UNIT
)
DISPLAY UNIT
25
818~2040PD
DESCRIPTION
For inch unit, this
regulator is used for
setting fine grinding feed
value on Y-axis.
DESCRIPTION
Press the red column
for setting the target
point to be ground.
Press the blue column
for setting the start
point.
Press the yellow
column for setting the
allowance for fine
grinding.
Press the green
column for setting the
intermittent spark out
grinding.