Installing Hydraulic System For Longitudinal Feed - Acer Supra 818PD Operation Manual

___________________________________________________________________________
4.3 INSTALLING HYDRAULIC SYSTEM FOR
LONGITUDINAL FEED
1. Place the hydraulic oil tank at the right side of the machine, shown as figure below.
2. Connect oil hoses (A, B) to the hydraulic oil tank.
3. Connect the power wire (C) of the hydraulic system to the electrical cabinet.
Fill oil into the hydraulic oil tank, until oil amount reaches 80~85% of the oil tank capacity
(Oil level reaches to 3/8~4/5 position of "D＂).
4.3.2 NOTICES:
1. The hydraulic oil tank capacity is 66 liters (818PD) and 135 liters (1020~2040PD).
2. Once the machine is used (8 hours running time per day), replace oil after the first 3 months.
Afterwards, replace oil every half year.
3. Periodically check the pump pressure on the hydraulic power unit. Normal pressure should
be kept in the range of 11~14kg/cm
4. Clean the filter screen in the hydraulic oil tank every half year.
4.3.3 RECOMMENDED HYDRAULIC OIL:
BRAND
SUN
SHOWA
ESSO
BP
2
.
GRADE
SUNVIS 916
A-R32
NUTO H32
EVERGOL HLP 32
BRAND
SHELL TELUS 32
MOBIL D.T.E 24
TEXACO LUBE TAC #2
ARAL VITAM GF 32
4-3
818~2040 PD
GRADE