Table 9. Camera Properties Dialog Box Description - Schick USBCam2 User Manual

Table 9. Camera Properties Dialog Box Description

Dialog Box Options
Video Decoder —
• Video Standard: NTSC_M (factory setting)
• VCR Input: Not checked (factory setting)
Video Proc. Amp —
• Brightness: 112 (factory setting)
• Contrast: 38 (factory setting)
• Hue: 64 (factory setting)
• Saturation: 25 (factory setting)
• Sharpness: 2 (factory setting)
Video Image —
• Image mask: Black (factory setting)
• Flip Vertical: Not checked (factory setting)
• Flip Horizontal: Not checked (factory setting)
• Use PC Cam: Not checked (factory setting)
Camera —
• White Balance: Fixed White Balance (factory setting)
• Shutter Mode: Electric Iris (factory setting)
• Enhanced Motion Stabilization: Not checked (factory setting)
USBCam2 User Guide B1051061 Rev. – 27