Appendix A. Reference Information; A-1. Removal And Replacement Procedures; A-2. Summary Of Specifications; Table 4. Specifications - Schick USBCam2 User Manual

Appendix A. Reference Information

A-1. Removal and Replacement Procedures

There are no user-serviceable parts in the USBCam2 system. Should you experience
problems with the USBCam2, please contact your local distributor of Schick Technologies
products. In the United States, Schick Technologies products are available exclusively
through Patterson Dental Supply, Inc. Call your local Patterson representative, local
Patterson branch, or 1-800-873-7683 for more information.

A-2. Summary of Specifications

USBCam2 is ETL-certified and compliant with the safety standards listed below.
Item
EMC/Safety
Input electrical rating
Transport and storage
conditions
Equipment type
Fuse
Restricted service
statement
Imager
Video output
Focus range
Focus type
External power supply
Maximum cable length
20

Table 4. Specifications

CAN/CSA C22.2 Medical Electrical Equipment Part 1: General
No.601.1-M90 Requirements for Safety
EC 93/42/EEC Medical Device Directive
Medical Electrical Equipment Part 1: General
IEC60601-1
Requirements for Safety
Medical Electrical Equipment Part 1: General
IEC60601-1-2 Requirements for Safety 2.Collateral Standard:
Electromagnetic Compatibility – Requirements and Tests
Medical Electrical Equipment: General Requirements for
UL60601-1
Safety
5VDC @ 440mA
Ambient temperature range: 0° F (-18° C) to 150° F (66° C)
Relative humidity range: less than 75%
Atmospheric pressure range: 700 hPa to 1060 hPa
Type BF equipment
63VDC/VAC, 1A fast blow fuse
Unless otherwise specified, this unit should be serviced only by the
manufacturer. It contains no user-serviceable parts.
CCD
High Speed USB 2.0
5 - 45 mm (0.2 - 1.77 in)
Fixed
None (power supplied via USB)
5 m (5.5 yds)
B1051061 Rev. –
Value
(on handpiece)
USBCam2 User Guide