Controls On The Usbcam2; Figure 1. Usbcam2 Controls; Table 1. Description Of Camera Controls - Schick USBCam2 User Manual

1.5. Controls on the USBCam2

An illustration of the USBCam2 is shown below in Figure 1. For a description of user
controls on the camera, refer to Table 1.
(1) Camera Lens and
Light Source (LEDs)
(2) On / Off Button
Number
1 Camera lens and LED (light-emitting diode) source
2 Power on/off button (See Note A)
3 Freeze frame capture button (See Note B)
4 USB cable connection (See Note C)
NOTE A: Light source will automatically time out after 5 minutes of continuous operation.
NOTE B: Can be set to either Freeze / Unfreeze images or Freeze / Take images. Refer to Section 4,
Operation, for details.
NOTE C: "B" connector end of USB cable connects here.
USBCam2 User Guide

Figure 1. USBCam2 Controls

Table 1. Description of Camera Controls

Description
B1051061 Rev. –
(3) Freeze Frame
Capture Button
(4) USB Connector
3