Cable Kits - Cisco uBR-3x10 Hardware Installation And Cabling Manual

Cable Kits

Cable Kits
The cables approved for use in the Cisco N+1 redundancy solution, are Mini Precision RG59 (95
percent) tinned copper braid with (100 percent) foil shield. This cable is serial digital interface (SDI)
rated with a 1 MHz to 3 GHz rating.
•
•
•
•
The different jacket colors are used for easy identification. The gray and brown RF cables are
preterminated with the F-connectors used to connect to the Vecima HD4040 series IF-to-RF upconverter
input.
Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
1-10
CAB-RFSW-3x10-T (bundled cable kit:1.2-m, CMTS to RFS, F to MCX). This kit includes 10
cables, 2 cables have F-connectors on both ends for UPx connections and 2 are single 0.2-m cables,
the others are 1.2-m F-connector to MCX-connector cables.
CAB-RFSW-3x10-10T (bunbled cable kit:10-m, RFS to HUB, MCX to F). This kit includes 10
cables, 2 single 10-m cables, and 13 extra F-connectors.
CAB-RFSW5X20TPMF (bundled cable kit, 3-m, MCX to F). This kit includes 2 bundles of 10
cables, 1 bundle of 5 cables, and 25 extra F-connectors.
CAB-RFS5X20TIMM (bundled cable kit, 1-m, MCX to MCX). This kit includes 2 bundles of 10
cables, 1 bundle of 5 cables, and 4 headers (2 extra to be used with the output cable kit,
CAB-RFSW-3x10-10T.
Chapter 1 Cisco uBR-3x10 RF Switch Overview
OL-1984-06