Leds - Cisco Catalyst 2960 Hardware Installation Manual

Chapter 1 Product Overview
Front Panel Description
Figure 1-16 Connecting Through an External AC Power Adapter
1
48 V
, 0.3 A
1 Power adapter port

LEDs

You can use the switch LEDs to monitor switch activity and its performance. Figure 1-17 shows and
example of the switch LEDs and the Mode button that you use to select one of the port modes.
All LEDs are visible through the GUI management applications—Network Assistant for multiple
switches and the device manager for a single switch. The switch software configuration guide describes
how to use the CLI to configure and to monitor individual switches and switch clusters.
The Catalyst 2960-24PC-L and Catalyst 2960-24LT-L switches have a PoE LED.
The Catalyst 2960-8TC-L, 2960G-8TC-L, 2960PD-8TT-L, 2960-24-S, 2960-24TC-S, and 2960-48TC-S
switches do not have an RPS LED.
Catalyst 2960 Switch Hardware Installation Guide
1-12
OL-7075-05