Front Panel Description; Catalyst 2960 Switch 24- And 48-Port Switches - Cisco Catalyst 2960 Hardware Installation Manual

Chapter 1 Product Overview
The Catalyst 2960-8TC-L and Catalyst 2960G-8TC-L switches do not support the 1000BASE-T or
GLC-GE-100FX SFP modules.
Some Catalyst 2960 switches have a redundant power system (RPS) connector for an optional
Cisco RPS 2300 or Cisco RPS 675 redundant power system that operates on AC input and supplies
backup DC power to the switch. See the compatibility matrix documents for the RPS systems on
Cisco.com for more information about switch support for the RPS models.
These models do not have an RPS connector:
•
•
•
•
•
•

Front Panel Description

These sections describe the switch front panels:
•
•
•
•
•
•
•
•
•
•

Catalyst 2960 Switch 24- and 48-Port Switches

These sections describe the Catalyst 2960 24- and 48-port switches:
•
•
•
OL-7075-05
Catalyst 2960-8TC-L
Catalyst 2960G-8TC-L
Catalyst 2960PD-8TT-L
Catalyst 2960-24-S
Catalyst 2960-24TC-S
Catalyst 2960-48TC-S
Catalyst 2960 Switch 24- and 48-Port Switches, page 1-3
Catalyst 2960 Switch 8-Port Switches, page 1-7
10/100 Ports, page 1-8
10/100/1000 Ports, page 1-9
PoE Ports, page 1-9
SFP Module Slots, page 1-10
Dual-Purpose Port, page 1-11
Power Input Port (Catalyst 2960PD-8TT-L Switch), page 1-11
LEDs, page 1-12
Cable Guard for the Catalyst 2960-8TC-L, 2960G-8TC-L, and 2960PD-8TT-L Switches, page 1-17
Catalyst 2960-24-S, 2960-24TC-S, and 2960-48TC-S Switches, page 1-4
Catalyst 2960-24PC-L 2960-24TC-L, 2960-48TC-L, 2960 -24LT-L, 2960-24TT-L, and
2960-48TT-L Switches, page 1-5
Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L Switches, page 1-6
Catalyst 2960 Switch Hardware Installation Guide
Front Panel Description
1-3