Dual-Purpose Port; Power Input Port (Catalyst 2960Pd-8Tt-L Switch) - Cisco Catalyst 2960 Hardware Installation Manual

Chapter 1 Product Overview

Dual-Purpose Port

You can configure a dual-purpose port as either a 10/100/1000 port or as an SFP module port.
Only one port can be active at a time. If both ports are connected, the SFP module port has priority.
You cannot configure the priority setting.
You can set the 10/100/1000 ports to autonegotiate. You can also configure them as fixed 10, 100, or
1000 Mb/s (Gigabit) Ethernet ports. You can configure the duplex setting. See the software configuration
for more information.

Power Input Port (Catalyst 2960PD-8TT-L Switch)

The Catalyst 2960PD-8TT-L can receive power from these sources:
1.
2.
Figure 1-15
SYST
STAT
DPLX
SPD
1
OL-7075-05
Through a 10/100/1000 port from an upstream Ethernet switch that provides power (complies with
IEEE 802.3af). (See Figure
Through an external AC power adapter that connects to the back of the switch. This external power
adapter (PWR-A=) is not included with the switch, but you can order it from your Cisco
representative. (See Figure
Connecting Through a 10/100/1000 Port
1x 2x 3x
CONSOLE
MODE
10/100/1000 Port
1-15.)
1-16.)
4x 5x 6x 7x
8x
Catalyst 2960 Switch Hardware Installation Guide
Front Panel Description
Catalyst 2960
Series
1
PoE INPUT
1
1-11