The 1Var Sub Menu; The Plot Sub-Menu - HP 50g User Manual

PAR: shows statistical parameters.
RESET: reset parameters to default values
INFO: shows statistical parameters
The MODL sub-menu within PAR
This sub-menu contains functions that let you change the data-fitting model to
LINFIT, LOGFIT, EXPFIT, PWRFIT or BESTFIT by pressing the appropriate button.

The 1VAR sub menu

The 1VAR sub menu contains functions that are used to calculate statistics of
columns in the DATA matrix.
The functions available are the following:
TOT: show sum of each column in DATA matrix.
MEAN: shows average of each column in DATA matrix.
SDEV: shows standard deviation of each column in DATA matrix.
MAX : shows maximum value of each column in DATA matrix.
MIN : shows average of each column in DATA matrix.
BINS: used as x
Xcol column in DATA matrix with the frequency bins defined as
[x ,x + x], [x
s s
VAR: shows variance of each column in DATA matrix.
PSDEV: shows population standard deviation (based on n rather than on (n-1))
of each column in DATA matrix.
PVAR: shows population variance of each column in DATA matrix.
MIN : shows average of each column in DATA matrix.

The PLOT sub-menu

The PLOT sub-menu contains functions that are used to produce plots with the
data in the DATA matrix.
, x, n [BINS], provides frequency distribution for data in
s
,x +2 x],..., [x
s s
,x +n x].
s s
Page 18-17