HP 50g User Manual page 387
Graphing calculator
Hide thumbs
Also See for 50g:
- Advanced user's reference manual (693 pages) ,
- User manual (184 pages) ,
- Quick start manual (47 pages)
Table of Contents
Advertisement
Press ƒ, twice, to drop the contents of the stack.
Enter the PLOT WINDOW environment by entering „ò (press
them simultaneously if in RPN mode).
VIEW, then press @AUTO to generate the V-VIEW automatically.
PLOT WINDOW screen looks as follows:
Plot the graph: @ERASE @DRAW (wait till the calculator finishes the graphs)
To see labels:@EDIT L @LABEL @MENU
To recover the first graphics menu: LL@) P ICT
To trace the curve: @TRACE @@X,Y@@ . Then use the right- and left-arrow keys
(š™) to move about the curve. The coordinates of the points you
trace will be shown at the bottom of the screen. Check that for x =
1.05 , y = 0.231. Also, check that for x = -1.48 , y = 0.134. Here is
picture of the graph in tracing mode:
To recover the menu, and return to the PLOT WINDOW environment,
press L@CANCL@.
X 'EXP(-X^2/2)/ (2* )' >>.
<<
Use a range of –4 to 4 for H-
The
Page 12-4
Advertisement
Table of Contents
