The calculator provides function lim to calculate limits of functions. This function
uses as input an expression representing a function and the value where the
limit is to be calculated. Function lim is available through the command
catalog (‚N~„l) or through option 2. LIMITS & SERIES... of the
CALC menu (see above).
Note: The functions available in the LIMITS & SERIES menu are shown next:
Function DIVPC is used to divide two polynomials producing a series
expansion. Functions DIVPC, SERIES, TAYLOR0, and TAYLOR are used in series
expansions of functions and discussed in more detail in this Chapter.
Function lim is entered in ALG mode as lim(f(x),x=a) to calculate the
'x=a', and finally function lim. Examples in ALG mode are shown next,
including some limits to infinity. The keystrokes for the first example are as
follows (using Algebraic mode, and system flag 117 set to CHOOSE boxes):
„Ö2 @@OK@@ 2 @@OK@@ x+1‚í x‚Å
The infinity symbol is associated with the 0 key, i.e.., „è.
. In RPN mode, enter the function first, then the expression