display the DISPLAY MODES input form. Press the down arrow key, ˜, twice,
to get to the Stack line. This line shows two properties that can be modified.
When these properties are selected (checked) the following effects are
To illustrate these settings, either in algebraic or RPN mode, use the equation
writer to type the following definite integral:
In Algebraic mode, the following screen shows the result of these keystrokes with
neither _Small nor _Textbook are selected:
With the _Small option selected only, the display looks as shown below:
With the _Textbook option selected (default value), regardless of whether the
_Small option is selected or not, the display shows the following result:
Selecting properties of the equation writer (EQW)
First, press the H button to activate the CALCULATOR MODES input form.
Within the CALCULATOR MODES input form, press the @@DISP@ soft menu key to
display the DISPLAY MODES input form. Press the down arrow key, ˜, three
Changes font size to small. This maximized the amount of
information displayed on the screen. Note, this selection
overrides the font selection for the stack display.
Display mathematical expressions in graphical mathematical