Natural Logarithms And Exponential Function; Trigonometric Functions; Inverse Trigonometric Functions - HP 50g User Manual

Using powers of 10 in entering data
Powers of ten, i.e., numbers of the form -4.5´10
V key. For example, in ALG mode:
Or, in RPN mode:

Natural logarithms and exponential function

Natural logarithms (i.e., logarithms of base e = 2.7182818282) are calculated
by the keystroke combination ‚¹ (function LN) while its inverse function,
the exponential function (function EXP) is calculated by using „¸. In ALG
mode, the function is entered before the argument:
In RPN mode, the argument is entered before the function

Trigonometric functions

Three trigonometric functions are readily available in the keyboard: sine (S),
cosine (T), and tangent (U). The arguments of these functions are angles,
therefore, they can be entered in any system of angular measure (degrees,
radians, grades). For example, with the DEG option selected, we can calculate
the following trigonometric functions:
In ALG mode:
In RPN mode:

Inverse trigonometric functions

The inverse trigonometric functions available in the keyboard are the arcsine
(ASIN), arccosine (ACOS), and arctangent (ATAN), available through the
keystroke combinations „¼, „¾, and „À, respectively. Since
\4.5V\2`
4.5\V2\`
‚¹2.45`
„¸\2.3`
2.45` ‚¹
2.3\` „¸
S30`
T45`
U135`
30`S
45`T
135`U
-2
, etc., are entered by using the
Page 3-6