Using Overscan Function; Changing The Tv Channel Order - Avermedia A825 MediaCenter User Manual

Using OverScan Function

On some broadcast channels, you might see distorted lines or black spaces on the top, sides, or bottom of the
screen. These video artifacts derive from the source signal, and can be masked using the OverScan feature.
1 .
1 .
Select "Settings"
Analog TV" or "Configure Digital TV"
"Manage Programs"
2 .
2 .
Select the channel you want to hide the edges
of the picture.
3 .
3 .
Specify an appropriate number (0~20) to get
the better quality.
4 .
4 .
Select Save to save the settings or select
Cancel to abort without saving. If you want to
revert to factory settings, select Default.
Note: By default, the system is set to disable the Overscan item. To apply the overscan setting to one
specific channel, you need to go to "Settings"
"Configure TV Signal" and clear the Apply All check box. After clearing the Apply All check box
TV"
and select Save, you can now adjust the setting of a septic channel.

Changing the TV Channel Order

You may change the sequence of channels as you prefer.
1 .
1 .
Select "Settings"
Analog TV" or "Configure Digital TV"
"Manage Programs".
2 .
2 .
Select the channel you want to move.
3 .
3 .
Use to move upward or downward
until the selected channel moves to the desired
location.
"TV" "Configure
"TV"
"TV" "Configure
"Configure Analog TV" or "Configure Digital
Getting Started
23