TV Settings
4.2
All TV setting tips are included within this section.
Configure Analog TV / Configure Digital TV
1
.
1
.
Select "Settings"
Analog TV" or "Configure Digital TV"
"Configure TV Signal".
2
.
2
.
If you choose "Configure Analog TV" in steps
1, you need to determine the signal type:
Antenna or Cable. (If the country you choose in
Chapter 1.6 is USA or Canada, you can
determine the signal type: Antenna,
Cable-Standard and Cable-HRC.)
3
.
3
.
To apply the Overscan function to all channels
at a time, first select Apply All check box.
4
.
4
.
Specify an appropriate number (0~20) to get the
better quality.
5
.
5
.
Select Save to save the settings or select
Cancel to abort without saving.
Configure Digital TV
users)
1
.
1
.
Select "Settings"
"Configure TV Signal".
Digital TV"
2
.
2
.
Choose the switch type that is used by your
satellite system.
3
.
3
.
Select Edit to configure your satellite
information.
"TV"
"Configure
Configure TV Signal (Only for DVB-S
"TV"
"Configure
Configure TV Signal
More Settings
52