Fine Tuning Color and Quality of the Display
If the color and quality of a particular channel needs to be adjusted, please do the following.
1
.
1
.
Select "Settings"
Analog TV" or "Configure Digital TV"
"Manage Programs"
2
.
2
.
Select the desired channel.
3
.
3
.
Select
in the bottom-right of the screen
to go to the second page.
4
.
4
.
Then use
to adjust the Brightness,
Contrast, Hue, Saturation and Sharpness
until the image color is accurate.
5
.
5
.
You will need to perform fine-tune only if the
reception of the selected channels is not clear.
Use
to get a clear TV picture.
6
.
6
.
If the device you use can watch analog TV,
here you can also select the Noise Reduction
check box to obtain the better quality.
7
.
7
.
Select Save to save the settings or select
Cancel to abort without saving. If you want
to revert to factory settings, select Default.
Note: By default, the system is set to disable the color adjustment items. To adjust image color of one
specific channel, you need to go to "Settings"
Configure Color Adjustment" and clear the Apply All check box. After clearing the Apply All check
TV"
box and select Save, you can now adjust the setting of a specific channel.
"TV"
"Configure
"TV"
"Configure Analog TV or "Configure Digital
Getting Started
18