Table of Contents
Advertisement
Figure 3: DC And AC power supply wiring examples
NOTES:
1. 88-300VDC rated equipment: A 300VDC appropriately rated circuit breaker must be
installed within 3m of unit.
2. A circuit breaker is not required for 12, 24 or 48 VDC rated power supplies.
3. Separate circuit breakers must be installed and separately identified.
4. Equipment must be installed according to the applicable country wiring codes.
©
2008 RuggedCom Inc. All rights reserved
15
Rev104
Advertisement
Table of Contents
Need help?
Do you have a question about the RuggedSwitch RS969 and is the answer not in the manual?