Selecting A Base - Siemens HiPath 3000 Operating Manual

Step by Step
Ð
st
H/Set Settings
st
Handset
st
Select Base
st
Base 1
...
Best Base

Selecting a base

If your handset is registered at multiple bases, then you
can set a specific base or the base with the best recep-
tion as the base to be used. The handset then switches
automatically to this base.
You can change the base name that is displayed on the
handset at any time (
©
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the required base and confirm. The selected
base is ticked.
• Base 1 - 4: Selecting base n defines one specific Hi-
Path cordless system where the handset is regis-
tered.
• Best Base: If the handset is registered at multiple
cordless systems, it automatically switches to one
of these systems when it enters the relevant range.
For example: The handset is registered at the Gigas-
et home base as well as at the cordless system in
the company.
Press the On-hook key to end the operation.
Additional functions
Page 37).
111