Siemens HiPath 3000 Operating Manual page 79

Step by Step
> <
Open door?
> <
Service?
> <
* 61=Open door?
> <
Service?
> <
* 89=Door release
ON?
o
Enter the internal phone number for the door opener.
You are connected to the door opener.
Using the handset to open the door opener during
a call
[
Select the menu item and confirm.
Using the handset to open the door opener without
holding a conversation
or Press and hold down the Talk key or press the Speaker-
phone key.
Menu Call the system menu.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the internal phone number for the door opener.
The door is opened.
Press the On-hook key to end the operation.
Activating the door release
This function only works if it has been configured by the
service engineer.
or Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Follow the user guidance system from this point on-
wards. Enter the internal phone number of the door
opener, as well as the code and type of door release:
• 1=enable with ring,
• 2=enable w/o ring,
• 3=change password.
[
Confirm your entries.
Press the On-hook key to end the operation.
Conducting calls – enhanced functions
69