Technicolor MediaAccess TG799vn Setup And User Manual page 21

Manually activating the status LEDs
If the ECO( ) button is green or blue, you first have to press the info(
other LEDs.
For more information, see
Ethernet LED
Colour
Green
Off
Wireless LED
Colour
Green
Off
Broadband LED (if you are using the DSL Gateway scenario)
Colour
Green
Off
DMS-CTC-20110713-0016 v2.0
"Info button" on page 11.
State Description
Solid on Network device connected to the Ethernet switch.
Blinking Network device connected to the Ethernet switch and sending/receiving
data.
No Ethernet connection on your local network or the status LEDs are
deactivated
State Description
Solid on Wireless clients connected, no wireless activity
Blinking Wireless clients connected, wireless activity
No wireless clients connected or wireless access point disabled or the
status LEDs are deactivated
State Description
Solid on DSL line synchronised
Blinking Trying to detect carrier signal or pending DSL line synchronisation
MediaAccess Gateway powered off or the status LEDs are deactivated.
1 GETTING STARTED
) button to be able to view the status of the
13