Activating A Telephony Service On Your Mediaaccess Gateway - Technicolor MediaAccess TG799vn Setup And User Manual

6 TELEPHONY
6.3.1 Activating a Telephony Service on your MediaAccess
Gateway
How can I (de)activate a service on my MediaAccess Gateway?
You can (de)activate services in two ways:
Via the MediaAccess Gateway GUI.

Via (de)activation codes on your phone.

Activating a Telephony Service via the MediaAccess Gateway GUI
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Toolbox menu, click Telephony.
3 In the Navigation
4 In the Pick a task list, click View Telephony Services.
5 In the Navigation
6 Under Telephony services you can now activate or deactivate the services of your choice:
To:
Activate a service select the check box next to the service.

 Deactivate a service clear the check box next to the service.
7 Click Apply.
Activating a Telephony Service via Your Phone
To (de)activate one of the services just dial the corresponding code on your phone. For example, to activate Call Hold dial
*94; to deactivate the service dial #94.
To know which code to use:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Toolbox menu, click Telephony.
3 In the Navigation
4 In the Pick a task list, click View Telephony Services.
5 In the Telephony Services table, you can find the activation and deactivation codes.
60
"4.1 MediaAccess Gateway GUI" on page
bar, click Configure.
bar, click Configure.
"4.1 MediaAccess Gateway GUI" on page
bar, click Configure.
36.
36.
DMS-CTC-20110713-0016 v2.0