Buttons - Technicolor MediaAccess TG799vn Setup And User Manual

1.3.5 Buttons

Overview
Info button
The Info ( ) button allows you to enable the status LEDs. For more information, see
DECT Pairing/Paging button
If you press the DECT pairing/paging
Between 1 and 5 seconds, the MediaAccess Gateway pages all connected DECT phones.

Longer than 5 seconds, switches to registration mode to allow you to connect your DECT phone(s) to the integrated

DECT base station of the MediaAccess Gateway.
For more information, see
WPS button
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy way, without the need to
enter any of your wireless settings manually.
For more information, see
ECO button
The ECO ( ) button allows you to disable your wireless access point. You can do this when you are not using the wireless
access point. This allows you to save the energy that the MediaAccess Gateway would be using for the wireless access point.
For more information, see
The LED on the ECO button summarizes the overall status of your MediaAccess Gateway. For more information, see
"ECO LED" on page
Reset button
The Reset button allows you to reset your MediaAccess Gateway to factory defaults.
For more information, see
DMS-CTC-20110713-0016 v2.0
WPS
Reset
DECT
button:
"6.1.1 Connecting a DECT Phone to Your MediaAccess Gateway" on page
"5.1 Connecting Your Wireless Client via WPS" on page
"ECO button" on page 67.
12.
"11.7 Reset to Factory Defaults" on page
Reset
"1.3.6 Status LEDs" on page
44.
116.
1 GETTING STARTED
12.
53.
11