Technicolor MediaAccess TG799vn Setup And User Manual page 112

10 INTERNET SECURITY
 The Source Interface and IP Address (range).
Use Any as IP address in case all traffic for the interface should be parsed.
Or you can type a User-defined IP address (range).
The Destination Interface and IP Address (range)

Use Any as IP address in case all traffic for the interface should be parsed.
Or you can type a User-defined IP address (range).
 The Service type of the traffic; this can be a protocol (DNS, SMTP,...) or a specific MediaAccess Gateway system
service.
8 Select an Action that should be done on traffic for which the firewall rules applies:
Accept: to allow the traffic to pass

 Deny: to drop the traffic (without notification)
Count: to let the traffic pass, but count it (Hits)

9 Click Apply.
104
DMS-CTC-20110713-0016 v2.0