Voice Settings; Selecting A Dual Voice; Selecting A Split Voice; Voice Editing - Yamaha PSR-E443 Quick Manual

Voice Settings

Selecting a Dual Voice

1
Hold down the [DUAL] button for longer
than a second to call up "D.Voice."
"D.VOICE" is shown for a few seconds, then the
current Dual Voice appears.
2
Rotate the dial to select the desired Dual
Voice.

Selecting a Split Voice

1
Hold down the [SPLIT] button for longer
than a second to call up "S.Voice."
"S.VOICE" is shown for a few seconds, then the
current Split Voice appears.
2
Rotate the dial to select the desired Split
Voice.
40
PSR-E443 Owner's Manual
D.Voice
019
Syn.Str
077
019
Current Dual Voice
S.Voice
029
FngrBass
053
029
Current Split Voice

Voice Editing

For each of the Main, Dual and Split Voices, you can
edit the parameters such as volume, octave and depth
of the Reverb and Chorus, allowing you to create new,
custom sounds that best suit your musical needs.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up the desired item.
Voice parameters are indicated as below.
• Main Voice parameters: M.****** (Function
010–018)
• Dual Voice parameters: D.****** (Function
019–028)
• Split Voice parameters: S.****** (Function
029–034)
For information about each parameter, refer to the
Function List on page 53.
3
Rotate the dial to set the value.
Check the sound by playing the keyboard.
4
Repeat Steps 2–3 above to edit various
parameters.
5
If necessary, memorize the settings to
the Registration Memory (page 33).
The Voice-related settings are reset when a differ-
ent Voice is selected. If you want to store the cre-
ated sound for future recall, memorize the settings
to the Registration Memory.
M.Volume
064
010