Tempo Setting Of The Song; Tap Start; Song Volume; Melody Voice Setting Of The Preset Song - Yamaha PSR-E443 Quick Manual

Tempo Setting of the Song

This operation is same as that of the Style and Pattern.
Refer to page 46.

Tap Start

This operation is same as that of the Style and Pattern.
Refer to page 46.

Song Volume

1
Press the [FUNCTION] button.
2
Press the CATEGORY [+] and [-] buttons
several times to call up "SongVol"
(Function 002).
3
Rotate the dial to set the Song volume
between 000 and 127.
NOTE
• Song volume can be adjusted while a Song is selected.
SongVol
100
002
Song volume
Melody Voice Setting of the Pre-
set Song
You can change the Melody Voice of the current Pre-
set Song temporarily to any other desired Voice.
1
Press the [SONG] button, select the
desired Preset Song, then start play-
back.
2
Press the [VOICE] button, then rotate the
dial to select the desired Voice.
Strings
3
Hold down the [VOICE] button for longer
than a second.
After "SONG MELODY VOICE" is shown for a
few seconds, the Melody Voice of the Song will be
changed to that selected in Step 2.
Hold for longer than
a second.
NOTE
• Selecting another Song will cancel the changed Melody
Voice.
• You cannot change the Melody Voice of a User Song.
Song Settings
069
SONG MEL
PSR-E443 Owner's Manual
51