Adding Harmony - Yamaha PSR-E443 Quick Manual

Try Playing a Variety of Instrument Voices

Adding Harmony

You can add harmony notes to the Main Voice.
1
Press the [HARMONY] button to turn
Harmony on.
Although turning on the Harmony will select a
Harmony Type suitable for the current Main
Voice, you can select a different Harmony Type.
2
Hold down the [HARMONY] button for
longer than a second until "HarmType"
appears on the display.
After "HarmType" is shown for a few seconds, the
current Harmony Type appears.
Hold for longer
than a second.
Current Harmony Type
20
PSR-E443 Owner's Manual
Appears when the Harmony
is turned on.
HarmType
039
Trio
02
039
3
Rotate the dial to select the desired Har-
mony Type.
For details, refer to the Effect Type List of the sep-
arate Data List.
The effect and operation differs depending on the
Harmony Type. Refer to "How to sound each Har-
mony Type" below.
4
Press the [HARMONY] button again to
turn Harmony off.
How to sound each Harmony Type
• Harmony type 01 to 05
Press the right-hand keys while playing chords in
the auto accompaniment range of the keyboard
when the Auto Accompaniment is on (page 23).
• Harmony type 06 to 12 (Trill)
• Harmony type 13 to 19 (Tremolo)
• Harmony type 20 to 26 (Echo)
Adjusting the Harmony Volume
You can adjust the Harmony Volume in the Function
Settings (page 53).
Hold down two keys.
Keep holding
down the keys.
Play the keys.