Table of Contents
Advertisement
Creating Arpeggios
The Arpeggio function lets you create arpeggios (broken chords) by simply pressing
the notes of the chord. For example, you could play the notes of a triad—the root, third,
and fifth—to trigger interesting phrases. This feature can be used for music production
as well as performance.
Triggering the Arpeggio
1
Press the [ARPEGGIO] button to turn on
the Arpeggio function.
NOTE
• Selecting a Voice number between 259 and 298 will turn
on Arpeggio automatically.
2
Press a note or notes to trigger Arpeg-
gio.
The Arpeggio phrase differs depending on the
number of pressed notes and the area of the key-
board.
When Split is on, Arpeggio is applied only to the
Split Voice. When Split is off, Arpeggio is applied
to the Main and Dual Voices. Arpeggio cannot be
applied to the Split and Main/Dual Voices simulta-
neously.
NOTE
• Selecting a Voice number between 289 and 298 will turn
on Split automatically, as well as Arpeggio. When one of
those Voices is selected, Arpeggio is triggered only by
playing a key to the left of the Split Point.
• When an optional Footswitch (page 14) connected to the
SUSTAIN jack is pressed, the Arpeggio will continue to
play after the note is released (page 43).
3
To turn off the Arpeggio, press the
[ARPEGGIO] button again.
RS Sync1
150
Changing the Arpeggio Type
The most suitable Arpeggio Type is automatically
selected when you select a Main Voice, but you can
easily select any other Arpeggio Type.
1
Hold down the ARPEGGIO [TYPE] but-
ton for longer than a second.
In the display, "ARP Type" appears for a few sec-
onds, followed by the current Arpeggio Type
appears.
Hold for longer
than a second.
The currently selected arpeggio
type
2
Rotate the dial to select the desired
Arpeggio type
An Arpeggio Type List is provided in the separate
Data List.
SynArp1
004
PSR-E443 Owner's Manual
21
Hide quick links:
Advertisement
Table of Contents
