Registration/Freeze Group/Voice Set Settings - Yamaha PSR-9000 Owner's Manual

Registration/Freeze Group/Voice Set Settings

The explanations here apply to step #3 of the Basic Procedure on page 134.
Registration
You can enter descriptive names for each registration bank/number via the Name func-
tion.
Freeze Group
You can specify which settings are affected by the Freeze function (page 28) via this
function.
Selects a setting
you want to freeze
or "un-freeze."
Voice Set
This function determines whether or not the preset Voice, Effect, EQ, and Harmony
type settings assigned to each preset voice are recalled when a new voice is selected.
Select a part.
Press one of these buttons to change the
name of the Bank or Registration.
For information about how to enter the
name, refer to the Basic Operation (page
44).
Select a registration bank/
number you wish to name.
The parameters included in each
group are listed on page 178.
Set (mark) or remove (un-mark) the selected setting.
These four sets can be individu-
ally turned ON or OFF for each
part (RIGHT1, 2, 3, LEFT).
The PSR-9000 "Functions"
Quick Guide
on page 28
Quick Guide
on page 28
• The VOICE, DSP, EQ, and
HARMONY TYPE parameters
are listed on page 178.
Reference
139