Managing Onvif User Accounts - HIKVISION iDS-9600NXI-I8/8F(B) Series User Manual

Step 2 Select the authentication type.

Two authentication types are selectable: digest and digest/basic. If you select digest, as the RTSP
authentication, only the request with digest authentication can access the video stream by the
RTSP protocol via the IP address. For security reasons, it is recommended to select digest as the
authentication type.
Step 3 Click Apply to save the settings. And reboot device to take effect the settings.
Enable IP Camera Occupation Detection
Purpose
After enabling the feature, when search IP camera in Number of Unadded Online Device interface,
the status of IP camera the has been added by other device will show as
Step 1 Go to System > System Service> System Service.
Step 2 Check Enable IP Camera Occupation Detection.
Step 3 Click Apply to save the settings. And reboot device to take effect the settings.

18.7.2 Managing ONVIF User Accounts

Purpose
For the third-party camera connection to the device via ONVIF, you can enable ONVIF function and
manage the user accounts.
Step 1 Go to System > System Service > ONVIF.
Step 2 Check Enable ONVIF to enable the ONVIF access management.
Step 3 Click Add to enter the Add User interface.
Network Video Recorder User Manual
Figure 18-14 RTSP Authentication
182
.